Installing wooden
floors seems very difficult. GO HOUSE will give you tips and advice for
installing wooden floors. If you are curious about installing your own wooden
floor, see this article.
How to install your
wooden floor
The first stage
 |
| source : media.architecturaldigest.com |
Second phase
 |
| source : images-na.ssl-images-amazon.com |
Blind nails are a
method for hiding nails using newer boards. for language and barriers. push the
nail at a 45 degree angle through the tongue, then hide by adjusting the groove
from the next table. make sure the angle is the initial installation under the
surface of the wood to avoid interference with the connection
Third phase
 |
| source : thespruce.com |
 |
| source : familyhandyman.com |
Blind Naill (blind nail
line) through the tongue and repeat the process until the dialer can be used
(on the instrument). nailer floor needs space to use it. so usually up to 2-4
lines cannot be used from the floor. When using a floor nailer, be sure to
install a protective cover to protect the floor
Fifth stage
When you get to the
last line, nail back. in the last line. Cut the appropriate pieces, measure the
distance from the wall to the table. neither more nor less than distance. If
the tip is 1 inch wide or less, use a small amount of wood glue for the tongue
and insert the piece with a lever and a piece of wood used to protect the wall,
if not facing it on the nails of the tip, it will not collide with the wood and
be damaged. and make a hole with the appropriate putty
Sixth stage
finishing if your wood
is not covered but if it is enough to reach stage 5 and the above system is a
modern method, in fact there are many ways to install wood floors, ranging from
glue, puzzles, nail cooking systems, etc. , actually the above looks different
from usual. but above are modern methods with modern tools.
